Clark Equipment Victoria is selling this:

Bobcat S130

Back

Make: Bobcat
Model: S130
Category: Loaders: Skid Steers: Wheel
Year: 2008
Location: Australia: Australia
156 S Gippsland Hwy, Dandenong South, VIC, 3175, Australia
Hours: 5,041
Condition: Used
Price: Price on Request

Contact Seller

Description

USED 2008 BOBCAT S130 SKID STEER LAODER 2008 MODEL.
COMES WITH USED 1550MM DIGGA 4 IN 1 BUCKET WITH TEETH, JUST HAD 500 HOUR SERVICE COMPLETED.
2.4T OPERATING WEIGHT, GREAT FOR PROPERTY AND PERSONAL USE.
REPAIRS COMPLETED:
-500 HOUR SERVICE
-NEW SAFETY STICKER KIT
-REPLACED HORN
-REPLACED BEACON & SOCKET
-FRONT AND REAR STEERING OVERHAUL
-TWO REPLACED BUCKET CYLINDERS
-ADJUSTED RIGHT HAND LOWER MOTOR HOSE
-NEW HANDLE RUBBERS
AREAS TO NOTE:
-PAINT HAS FADED
-TILT PINS & BUSHES AND BOBTACH PINS & BUSHES HAVE WORN
-LIFT CYLINDER PINS & BUSHES HAVE WORN
-CAB HAS SOME RUST
-SEAT HAS TORN
-STEP TREADS WORN
-BROKEN REAR RED LIGHT
-NO FRONT DOOR
-BUCKET TEETH HAVE WORN
-DRIVE BELT & TENSIONER ARE WORN
-BUCKET CUTTING EDGE HAS WORN
-MISSING BATTERY ROD
SPECIFICATIONS
ENGINE
MAKE - KUBOTA
MODEL - V2203-M-DI-E2B-BC-3
GROSS POWER - 46 HP
POWER MEASURED @ - 2400 RPM
DISPLACEMENT - 2.2L
NUMBER OF CYLINDERS - 4
OPERATIONAL
OPERATIONAL WEIGHT - 2374.6 KG
FUEL CAPACITY - 50 L
OPERATING SPEED - 11.7 KM/H
MAX SPEED - 11.7 KM/H
LOADER
OPERATING LOAD RATING - 589.7 KG
TIPPING LOAD - 1194.8 KG
BUCKET CAPACITY - 0.28 M3
HYDRAULIC
PUMP FLOW CAPACITY - 64 L/MIN
RELIEF VALVE PRESSURE - 2600 PSI
DIMENSIONS
LENGTH WITH BUCKET - 3152 MM
LENGTH WITHOUT BUCKET - 2432 MM
WIDTH OVER TYRES - 1490 MM
HEIGHT TO TOP OF CAB - 1964 MM
CLEARANCE AT MAX LIFT AND DUMP - 2101 MM
WHEELBASE - 900 MM
GROUND CLEARANCE - 188 MM
REACH AT LIFT AND DUMP - 574 MM
TURNING RADIUS FROM CENTER - MACHINE REAR - 1745 MM
SPECIFICATIONS FOUND AT: http://www.ritchiespecs.com/specification?type=Co&category=Skid+Steer+Loader&make=Bobcat&model=S130&modelid=92186