- Make
- Caterpillar
- Model
- 140 M AWD 2X INSTOCK LIKE NEW
- Category
- Construction / Motor Grader
- Year
- 2013
- Location
-
Europe (Continental): Netherlands
Metaalweg 27, 6551 AC, NIJMEGEN, - Netherlands - Condition
- Used - very good condition
- Price
- Price on Request
Geurts Trucks b.v.
is selling this:
Caterpillar 140 M AWD 2X INSTOCK LIKE NEW
Description
- Type of fuel: DieselPower: 179 kW (243 HP)Year of manufacture: 2013cat 140 m awd moter grader 2x in stock with following specs
- A. Overall Length 29.2 ft in 8898 mm
- B. Width Over Tires 8.5 ft in 2581 mm
- C. Height to Top of Cab 10.8 ft in 3287 mm
- D. Wheelbase 20.1 ft in 6126 mm
- E. Rear Ground Clearance 1.1 ft in 344 mm
- F. Front Ground Clearance 2 ft in 600 mm
- G. Tandem Axle Wheelbase 5 ft in 1523 mm
- H. Blade Base 8.4 ft in 2557 mm
- Specification
- Engine
- Make Caterpillar
- Model C9.3 ACERT VHP
- Power Measured @ 2100 rpm
- Torque Measured @ 2100 rpm
- Net Power Gears 7-8 243 hp 181.2 kw
- Net Torque Gears 7-8 920 lb ft 1247.4 Nm
- Displacement 567.5 cu in 9.3 L
- Operational
- Std Operation Weight - Front Axle 9684 lb 4392.6 kg
- Std Operation Weight - Rear Axle 30227 lb 13710.7 kg
- Std Operation Weight - Total 39911 lb 18103.3 kg
- Max Operation Weight - Front Axle 13343 lb 6052.3 kg
- Max Operation Weight - Rear Axle 36444 lb 16530.7 kg
- Max Operation Weight - Total 49787 lb 22583 kg
- Fuel Capacity 109.9 gal 416 L
- Oil System Fluid Capacity 7.9 gal 30 L
- Cooling System Fluid Capacity 14.8 gal 56 L
- Hydrauilc System Fluid Capacity 26.4 gal 100 L
- Transmission Fluid Capacity 17.2 gal 65 L
- Circle Gearbox Fluid Capacity 1.8 gal 7 L
- Tandem Case Fluid Capacity (each) 16.9 gal 64 L
- Transmission
- Type Direct Drive, Powershift
- Number of Gears - Forward 8
- Number of Gears - Reverse 6
- Max Speed - Forward 29 mph 46.6 km/h
- Max Speed - Reverse 22.9 mph 36.8 km/h
- Steering
- Articulation L/R 20 degrees
- Turning Radius 25.5 ft in 7.8 m
- Front Axle
- Wheel Lean 18 degrees
- Oscillation - Total 32 degrees
- Ground Clearance 2 ft in 600 mm
- Hydraulic System
- Pump Type Variable Piston
- Pump Flow 55.7 gal/min 210.8 L/min
- Relief Valve Pressure 3500 psi 24131.6 kPa
- Moldboard
- Moldboard Width 12 ft in 3657.6 mm
- Moldboard Height 24 in 609.6 mm
- Moldboard Thickness 0.87 in 22 mm
- Max Depth of Cut 28.1 in 715 mm
- Side Shift Left 20.1 in 510 mm
- Side Shift Right 26 in 660 mm
- Blade Pull at Max Weight 20044 lb 9091.8 kg
- Blade Down Pressure 22884 lb 10380 kg
- Circle
- Diameter 60.2 in 1530 mm
- Rotation 360 degrees
- Shift Left 27.4 in 695 mm
- Shift Right 28.7 in 728 mm
- Max Reach Outside Tires - Left 70.5 in 1790 mm
- Max Reach Outside Tires - Right 77.9 in 1978 mm
- Max Lift Above Ground 18.9 in 480 mm
- Blade Tip Angle - Front 40 degrees
- Blade Tip Angle - Rear 5 degrees
- Dimensions
- Height to Top of Cab 10.8 ft in 3287 mm
- Overall Length 29.2 ft in 8898 mm
- Width Over Tires 8.5 ft in 2581 mm
- Wheelbase 20.1 ft in 6126 mm
- Blade Base 8.4 ft in 2557 mm
- Tandem Axle Wheelbase 5 ft in 1523 mm
- Rear Ground Clearance 1.1 ft in 344 mm
- Front Ground Clearance 2 ft in 600 mm
- we have 2 the same units in stock both machines are ready for work today
$279,005 USD
$7,157 USD
$630,105 USD
*
Ø
▼