CMI PR500C

1998 CMI PR-500C in good overall condition with 7411 hours. The machine will cut a 7'2 wide path and up to 12 inches deep depending on the density of the materiai. Belts are new, were changed in 2013 as were the rubber pads on the tracks that drive the machine on the ground. the machine has not been used much since. Some hydraulic hoses and seals were changed to allow the profiler to be driven. The machine was observed operate as it should. The only negative aspects are minor: 1. the rubber boot lining the chute that drops the ground asphalt onto the discharge belt is worn. 2. The metal to the right side of the chute next to the top of the discharge belt is slightly bent. Images & Videos