Ford F650 SD XLT

2005 Ford F650 SD XLT; Engine: ISX; Engine HP: 240; Transmission: Automatic; Diesel; Front Axle: 8500; Rear Axle: 17,500; GVWR: 26,000; WB: 185; Venco Venturo HD40KX Brand Hydraulic Crane Rated at 6000 lbs. The Venturo HT40KX is fully hydraulic, and features 20' full-hydraulic extension boom with capacity-overload shut-off system, anti-two-blocking system, remote control pendant with 25 ft. cord and load block with swivel hook safety latch. CAPACITY: 6,000 lb RATING: 40,000 ft lb; maximum lifting capacity of 6,000 lb at 6 ft Miller Bobcat 225 Welder/Generator with 665 Hours. http://www.millerwelds.com/products/enginedriven/product.php?model=M90334 Venco Venturo Service Bed. BED FEATURES & BENEFITS • Jet Kote ASTM A-60 steel construction • LED Stop/Turn/Tail/Backup, Marker and ID Lighting included with Wire Harness and Junction Box. All bodies are designed with pre-punched light mounting holes for ease of installation • Optional workbench bumper with pass-through storage area and hinged doors with vice-plate • Fold-down, rear tailgate sized to the full width of the bed opening with right-hand and left-hand zinc plated tailgate latches and hinges • Three-point keyed-alike premium ergonomic Eberhard compression door handles for increased ease of use • Unobstructed reinforced compartment for 25,000, 40,000, 50,000 and 66,000 FT-LB cranes • Dual weather stripping in protective door channels for added water protection • Venturo Crane Bodies include mudflaps • Gutter-style drip rail above compartment doors for added water protection • Pre-installed front and rear outrigger cross-tubes with FULL STABILITY in all rotation zones • Substructure consists of a one-piece continuous longitudinal frame with integrated crane tower reinforcement up to 66,000 FT-LBS • Ttie downs installed in the cargo floor with a 5,000 lb • Bulkhead and wheel well panels constructed of 12-guage Jet Kote ASTM A-60 steel sheet • All stainless steel continuous hinges for unmatched security • Stainless-steel spring-loaded door keepers hold doors open at 90 degrees and are self-closing • Double-panel lap-style 14-guage Jet Kote ASTM A-60 steel doors • Pre-punched bottle vents 2005 Ford F650 SD XLT Odometer Reads: 241607; Overall Condition: Good; A/C: Good; Heater: Good; Glass: Good; Hydraulic Brakes; Automatic Trans; Engine Make: Cummins; Wheels: Steel; Unit Runs & Operates as it Should?: Yes; Venco Venturo HD40KX Brand Hydraulic Crane Rated at 6000 lbs. The Venturo HT40KX is fully hydraulic, and features 20' full-hydraulic extension boom with capacity-overload shut-off system, anti-two-blocking system, remote control pendant with 25 ft. cord and load block with swivel hook safety latch. CAPACITY: 6,000 lb RATING: 40,000 ft lb; maximum lifting capacity of 6,000 lb at 6 ft Miller Bobcat 225 Welder/Generator with 665 Hours. http://www.millerwelds.com/products/enginedriven/product.php?model=M90334 11' Venco Venturo Service Bed. BED FEATURES & BENEFITS • Jet Kote ASTM A-60 steel construction • LED Stop/Turn/Tail/Backup, Marker and ID Lighting included with Wire Harness and Junction Box. All bodies are designed with pre-punched light mounting holes for ease of installation • Optional workbench bumper with pass-through storage area and hinged doors with vice-plate • Fold-down, rear tailgate sized to the full width of the bed opening with right-hand and left-hand zinc plated tailgate latches and hinges • Three-point keyed-alike premium ergonomic Eberhard compression door handles for increased ease of use • Unobstructed reinforced compartment for 25,000, 40,000, 50,000 and 66,000 FT-LB cranes • Dual weather stripping in protective door channels for added water protection • Venturo Crane Bodies include mudflaps • Gutter-style drip rail above compartment doors for added water protection • Pre-installed front and rear outrigger cross-tubes with FULL STABILITY in all rotation zones • Substructure consists of a one-piece continuous longitudinal frame with integrated crane tower reinforcement up to 66,000 FT-LBS • Ttie downs installed in the cargo floor with a 5,000 lb • Bulkhead and wheel well panels constructed of 12-guage Jet Kote ASTM A-60 steel sheet • All stainless steel continuous hinges for unmatched security • Stainless-steel spring-loaded door keepers hold doors open at 90 degrees and are self-closing • Double-panel lap-style 14-guage Jet Kote ASTM A-60 steel doors • Pre-punched bottle vents , ISX Engine, 240 HP, Diesel, Tires approximately Good Condition, 185 wheel base, 8500 front axle, 17,500 rear axle, 26,000 GVWR, NO HAND TOOLS INCLUDED. Spare Crane Remote Included, Two Manual Outriggers, Heated mirrors, Anval, I have a video of it operating. Third Party Financing Available. Freight Estimates can be provided from the link on our website. www.equipsellsit.com Third Party Inspections can be arraigned. All Reasonable offers considered; Call for details today and to set an appointment to see. More Photos if e-mail is provided.; Wheels: Steel; Tires @: Good Condition; Overall Weight: 23,000; Batteries: Good; Overall Condition: Good; A/C: Good; Hyd. Cylinder: Good; Heater: Good; Engine Make: Cummins; Boom: Good; Tire Size: 245/70R 19.5; Odometer Reads: 241607