Make
International
Model
ACCO 2350G
Category
Trucks: On Road Trucks: Water Trucks: Rigid
Year
2002
Location
Australia: Australia
Windsor Rd, McGraths Hill, NSW, 2756, Australia, LMCT 8701
Condition
Used
Price
Price on Request

Description

  • 2002 International Acco 2350G Water Truck MDG-15 Compliant
  • Cummins ISC
  • Allison 'World Series' Automatic
  • - NEW Chelsea Hot Shift PTO (Has the ability to switch the pump on up to 30km/h)
  • - This gearbox can also change gears while the water pump (PTO) is engaged
  • Body
  • 16,000 Litre square tank with radius rolled edges, constructed from 5mm (350 Dual Grade) Australian steel
  • - Elastic epoxy lined inside
  • - 1x Longitudinal Baffle
  • - 3x Latitudinal Baffles
  • - Air operated hand rails
  • - Non slip staircase behind cab
  • - Overhead fill with funnel (Centre mounted)
  • - Roll over protection (ROPS) Certified (AS2294 / ISO3471) Including Engineers certificate and drawings
  • Pump
  • Southern Cross Pro High Pressure' 4" x 3" x 10" (3,000L/Min | 100 psi) 'Australian Made Tough'
  • All metal work has been 'Hot Dipped' Galvanized
  • Plumbing
  • - 1x 2" Pressure relief valve fitted
  • - 2x 3" Rear Sprayers fully adjustable (Left / Right)
  • - 1x 3 'Water Wall' nozzle (Centre)
  • - 2x 3" Side Batter Sprayers (Mounted on rear of tank)
  • - 2x 3" Front Frogger Sprayers fully adjustable (Left / Right)
  • - 1x 3" Elkhart Brass - Sidewinder EXM wireless water cannon with Fog / Jet nozzle
  • - 1x 3" Dust Suppression bar with the ability to go from left to right (pressure or gravity fed)
  • - 1x 20 Metres of 1.5" hose on a 'KOREEL' geared reel with adjustable jet nozzle
  • - 2x 3" Fillers on check valves (Left & Right)
  • - 2x 6" Hose storage compartments including 2x 5m 3" Suction hose
  • - 1x 4" Cam-Lock off pump to suck from a Dam or Creek
  • - 1x 3" Tank outlet on cam-lock with butterfly valve (located in front of tank)
  • All valves are 'Challenger' Australian made (Built Tough)
  • Included Extras
  • - Class 1 (3M) Reflective Tape
  • - Emergency Stops
  • - Lockable starter isolator
  • - Lockable battery isolator (4 Pole)
  • - Jump Start receptacle (CAT)
  • - 9kg Fire Extinguisher (2.5kg in cabin)
  • - Stainless toolbox (1200x600x600)
  • - 6x Amber flashing lights
  • - 3x LED Work Lights
  • - 2x LED Strobes
  • - Highlights (Indicators, tail and stop lights)
  • - UHF radio (commercially programmable)
  • - First aid kit (Trauma)
  • - Reversing alarm (with light)
  • - Whip aerial flag
  • - Wheel chocks
  • - Vented Radiator Cap
  • - Full Set of Warning Stickers
  • - Protective Boots on Batteries
  • - Inclinometer fitted
  • - Maximum operating grade of the plant. Front to rear and side to side
  • - Compliance statement with all relevant standards and guidelines
  • - Installation, testing, commissioning and dismantling manuals
  • - Maintenance manual
  • - Electrical schematics
  • - Parts manual
  • - Operating Risk Assessment
  • - Operators Manual
  • - Design risk assessment for truck and tanker
  • - Pneumatic schematic
  • - Water schematic
  • - Factory acceptance testing and commissioning for the truck
  • - Maintenance history
  • Compliant with all Australian Mines
  • Price $138,850 + GST
  • All trucks come with a 3 months NSW registration
  • - 12 Months Standard Warranty (on water truck fit-out only)
  • - 24 Months Water Tank Structural Warranty
  • - 5% deposit to place order or company P/O
  • All our tankers are built from scratch in-house (Port Kembla, NSW) using the finest Australian steel.
  • Because every WTBB tanker is custom built, we can adapt our spec to suite your needs...
*
Ø

Similar Machines

(Similar models of the same year with comparable operating hours.)