HDD Broker, Inc. is selling this:

Mincon HDD40

Back

Make: Mincon
Model: HDD40
Category: Construction / Drilling Equipment
Location: North America: United States of America
2575 Northbrooke Plaza Drive Suite 100, 34119, Naples, - USA
Condition: Used
Price: Price on Request

Contact Seller

Description

General Description: Mincon HDD40.
Seller Notes:
-System only used twice, about 6 hours
-Excellent Condition
Accessories: Comes with Two 2-1/2 inch Hoses:
-One is 30' long
-One is 20' long
Tool for drilling 4-1/4" (108mm) pilot bores in hard rock formations. Seller Notes: This system provides the necessary equipment to convert any HDD drill machine from a mud drilling machine to a pneumatic drilling machine.
Recent Work/Modifications: Seller states the pump cart has New hoses, New tires and fresh fluids.
Additional Information: SPECS
Hammer Outside diameter: 3.35" (85 mm)
Pilot Bit Size: 4.25" (108 mm)
Hammer Length: 73.5" (1867 mm)
Hammer Weight: 109 lbs (49.4 kgs)
Piston Weight: 8 lbs (3.6 kgs)
Bit Shank Type: HDD40
Backhead Thread: 2-3/8" A.P.I. Reg Pin
-Dual steering point design incorporating slanted drill bit and 2° bent sub
-High frequency hammer cycle transmits less vibration
-High pressure/high volume compressed air powers drilling operations and requires minimal torque
-Shorter body design allows for easier steering in the bore hole and less rotational stresses on hammer body
-Existing locating electronics (DCI, Sub SITE, or WIRELINE) can be used
-Support Station delivers compressed air mixed with a water/polymer (3-5 gal/min) and rock drill oil (2-4 pints/hr) to operate the drilling cycle
-Minimal environmentally friendly clean up, can be used on environmentally sensitive locations using biodegradable rock drill oils
-- For more information, visit our website and enter reference #20941
Hours : 6