- Make
- Nordmeyer
- Model
- DSB 2/10
- Category
- Construction / Drilling Equipment / Waterwell Drill Rig
- Year
- 2003
- Location
-
Europe (Continental): Poland
22-100 Chelm Poland - Hours
- 16,500
- Condition
- Used
- Serial Number
- 1759
- Price
- Price on Request
GEOODWIERT ŁUKASZ ŚWIECA
is selling this:
Nordmeyer DSB 2/10
Description
Drilling depth up to: 400m
Installed power: 100KW
Drilling rig can use more then 10 method of drilling
Patented construction of the mast
Maximum force of the mast – 14.000 daN
Feed length – 7,70 m
Length of mast – 10,00 m
Feed force/ pull back force – 10.000 daN
Pull down force – 4.000 daN
Crown of mast-winch (pull back force 1.900 daN), 150 meters of rope
Double rotary head, type: KSP 7.8.2, sn: 0694-
I gear: -torque 1500 daNm, speed 0-62 rpm
II gear: -torque 750 daNm, speed 0-120 rpm
Quick manual and automatic mechanism for unscrew and grab rods/pipes
Additional cylinder for wrenching / pull up pipes from bore hole
Drill head movable in 4 positions
3x mud pumps:
- Centrifugal AMTEC pump, nominal working pressure: 10 bar, flow: 2500 l/min
- Screw pump WAGEN, nominal working pressure 16bar, flow 600l/min
- Three piston pump CAT, nominal working pressure 25bar, flow 30l/min
All pump are powered and control by hydraulic system
Perfec solution for all geology.
Year of construction: 2002/2003
Milage: 53841 km
Working hours: 16500 mth
VIN: 1759
Maximum size of casing pipe in double rotary head preventer: 185mm
Maximum size of casing/bits diameter:
- Straight Flush Rotary Drilling
A) direct flush rotary drilling up to
dia. 17½” = dia. 445 mm
B) reverse circulation drilling with sludge
pump or air-lift drilling
with compressor up to drilling dia. 680 mm
in front of the mast, resp. up to dia. 1000 mm
below the mast.
- Down-The-Hole-Hammer Drilling with stand-by compressor up to drilling dia. 17½” = dia. 445 mm
Condition:
Machine is in immaculate condition, always serviced in Nordmeyer service.
Machine never working in Poland.
Always serviced by Nordmeyer GmbH and Mercedes-Benz service station in Swizerland.
2. Casing pipes
Orginal Nordmeyer casing tubes, outside/inside diameter: 158/142mm, 2m length, quantity: 60 meters are including in price
3. Rods
Orginal Nordmeyer 95NS, 95mm, suitable for centrifugal pumps and DTH hammer, friction welded, 95mm, 2m length, quantity: 120 meters are including in price