Other BENTELE BBT 1100|BBT 1500 HOLZHACKER, WOODCHIPPER,

BENTELE: MADE IN AUSTRIA www.bentele.at

Our wood chippers vary from a 50 HP tractor chipper to a 1300 HP chipper built on a trailer.
 Our special rotor system creates less than 10% fine particle dust
 Our heavy drums provide strong centrifugal force
 Fuel consumption from 0,16 l to 0,22* l Diesel/srm (loose cubic metre) woodchips
 Changing the cutting blades can be performed within 15 to 20 minutes. This results in very little downtime for this necessary operation
 The lifetime of the chipper blades is increased by up to 200% through our innovative roller system
 Uniformity of woodchip size can provide up to 15 % extra energy output at the cogeneration plants
 Therefore there is no mould or rot formation during the storage process
 The chippers are characterized by cost effectiveness because of a sturdy and low-wear construction as well as low fuel consumption. Simplicity of design prevents failure to components through vibrations

NEW BBT 1100 - powerful chipper on a 4-axle truck chassis or on tandem hook lift system

BBT 1100:
Specifications:
Feed opening: 1300 x 800 mm
Engine: CAT C-18 776 hp
Capacity: 18 litres
Cylinder: straight-6
Fuel consumption: 38 litres / h
Rotor diameter: 1100 mm
Number of blades: 4
Stem diameter: softwood: 80 cm, hardwood: 40 cm (depending on version)
Chipping performance: softwood: up to approx. 300 m³ chips per hour
Chip size: G 30 to G 80
Chip delivery: 360 ° rotatable discharge pipe or 360 ° rotatable, dust-free conveyor
Discharge height: 4.5 m
Time required for blade change: 20 min approx.
Weight: approx. 15 t without truck and crane
Platform transport types: On trucks rigid or swivel, centre-axle trailer rigid or swivel and semi-trailers rigid or swivel

This machine can also be run as a stationary unit with electric motors.

NEW BBT 1500 - for coarse woodchips G 100
The BBT 1500 series is built primarily for coarse woodchips (G 100). This machine is supplied on a standard three-axle semi-trailer.

BBT 1500:
Specifications:
Feed opening: 1300 x 1100mm
Engine: CAT-C 27 ACERT 950 hp
Capacity: 27 litres
Cylinder: 12 V
Fuel consumption: 65 litres / h
Rotor diameter: approx. 1500 mm
Number of blades: 4
Stem diameter: softwood: 110 cm, hardwood: 60cm (depending on version)
Chipping performance: soft wood up to 500 m³ chips per hour
Chip size: G 40 to G 100
Chip delivery: rear conveyor belt adjustable 10° left or right
Discharge height: approx. 6 m
Time required for blade change: approx. 20 min
Weight: approx. 32 t depending on customer specifications
Platform transport types: rigid to semi-trailers

This machine can also be run as a stationary unit powered by electric motors.