SANDVIK DP1100I

Tophammer – Blasthole Drilling Rig
with Tier3-engine!

Hours engine: approx. 1150
Hours hammer: approx. 600

Hole diameter: 89 – 140 mm (3 ½ -5 ½ ”)
Drill Steel: 51, 60 mm (2, 2 3/8”) rods
or 76, 87 mm (3, 3 ½”) tubes

Standard Equipment:
Caterpillar engine C9 ACERT
225 kW (306 HP) /1 800 rpm (TIER3)
Rock drill: HL1060T PE
Feed: LF1514 with hose reel + Pito 15H
Rod changer: RC1614 / 7+1 rods
Boom: ZB1550H
Carrier: FL6, oscillating
Compressor: Enduro 25G
(14 m³/min-10 bar / 494 cfm/min-145PSI)
Dust collector: DC1550H, hydraulic
ROPS/FOPS cabin with A/C and heater
Reversing alarm
Movable suction head
Suction shutdown for water holes
Flushing control automatics
TIMi for inclined holes and hole depth measuring
Working lights 15 pcs. (9 x front, 6 x rear)

Optional Equipment:
Power extractor
Primary cyclone PE 80H
Three-bar grouser plates
Rod greasing with 5 gallon bucket
Central oiler SLU 30-1 for flushing head, drill steel and hammer
Feed support for soft ground
Anti-freeze system for air lines
Horizontal drilling support
Roller shutter for cabin windows
Dustmizer (flap feeder)
Fuel heater for cabin, hydraulic oil and engine
Towing hook
Cooler bag
Special seat ISRI6000
Electric fuel filling pump
Reversing camera
Radio with CD and MP3

Weight: approx. 22000 kg
_____________________________________________________

FOR NORTH AMERICAN REQUESTS PLEASE CONTACT:

Alex Simpson
Tel. +1 828 333 8195
Email: alex@recon-trading.de