Sany SRC885

Engine: Cummins QSB6.7 Tier 4Transmission: Automatic (6 Forward 2 Reverse)Maximum Tip Height: 209.7’ (Approximate)Lifting Capacity: 170,000 lbs (10’ Radius)Full Power Boom (5 Section): 38.7’ - 147.6’Jib: 30.2’ - 52.5’Boom Five section sequenced synchronized full power boom. (38.7’ – 147.6’) Boom elevation -2º to 78ºJibSide mounted bifold boom extension (30.2’ – 52.5’) with 0º, 15º, and 40º offset.SwingThe swing system can rotate 360 degrees continuously in both directions. The independent swing circuit eliminates function interaction. Planetary drive offers two-speed swing for operator preference and precise load control. Maximum speed 2.0 rpm with a 14 ft 11 in swing area.Main and Auxiliary HoistsBraden main and auxiliary hoists are independently driven and controlled by the joysticks.Rope Diameter: 3/4”Max Line Speed: 459 ft/minMax Line Pull: 20,590 lbsDrum Capacity: 841 ftHoist Drum Rotation Indicator: All drums are equipped with an electric drum rotation indicator device that will vibrate the operator’s joystick as the drum rotates.Drum Brake: All hoist drums are equipped with a spring applied hydraulic released brake. The brake will automatically apply when the control handle returns to neutral.Third Wrap Indicator: A roller riding on the hoist wire rope will actuate a switch to warn the operator when 3 wraps are remaining. The system will sound a buzzer and an alarm indicator will be displayed on the instrument cluster and automatically stop the drum movement.Cab Spacious ergonomic cab with all steel construction. Optimum visibility, tinted safety glass throughout. Opening skylight with visor and wiper system. Sliding door on the left hand side and a framed sliding window on the right hand side. Acoustical foam to absorb noise and insulate the cab. Deluxe 6 way adjustable seat is equipped with mechanical suspension and includes arm rests and head rest.ControlsPilot operated, hydraulic joysticks produce smooth variable control of crane functions. Drum rotation indicators are incorporated in the handles. Steering column mounted turn signals and transmission control. Foot pedals for swing brake, telescope, service brake and accelerator. Hi-Low hoist speed control switch in handle for ease of use. SANY electrical system includes LML and lockout with CAN bus for reduced complexity. Built in diagnostics and engine instrumentation display. Electrical system is 24 volt. OutriggerThree position outriggers provide 12.44” of ground penetration and 24 ft of extension to level the crane. Superior accessibility from ground for ease of maintenance. CounterweightTwo Piece 28,660 lbs Load Moment LimiterSANY DESIGNED LOAD MOMENT LIMITER (LML)The user friendly SANY designed LML is prominently displayed, simple to set up and operate and full machine diagnostic capabilities.Anti-Two BlockA limit switch and an actuation weight on load lines are provided to prevent two-blocking of the hook block and the overhaul ball. When the lifting hook reaches its maximum height, a limit switch will activate the buzzer on the control panel, meanwhile the indicator light will blink and automatically stop the lifting operation of hook block.Other Safety FeaturesBackup AlarmCrane Level Indicator: A bubble level displaying the machine angle is mounted in the operators cab.Boom Angle Indicator: The boom angle is displayed on the LML console.Boom Length Indicator: A cable reel is provided to measure the boom length and it is displayed on the LML console.Load Holding Valves: Load holding valves are provided on all cylinders that support the load to prevent uncontrolled lowering of the boom in the event of a hydraulic system failure (e.g., supply hose rupture).Outrigger Jack Integral Holding Valve: All four outrigger jacks are supplied with an integral holding valve to prevent cylinder retraction in the event of a hose failure.Outrigger Position Sensor: Each outrigger beam is supplied with a position sensor to monitor the extension of the outrigger beams.Lighting: Equipped with driving lights in front of machine, stop turn & tail lights in the rear of the machine, operator’s cab interior light, and a spot light mounted on the front of the cab.Rearview Mirror: Externally installed on the left of the operator’s cab for monitoring the rear of the machine.Swing Lock: Hydraulic pin lock to lock the crane in front positions.Seat Switch: The operator must be seated for all machine functions to work.Horn: The crane is supplied with a horn for the operator to warn personnel in the vicinity of the crane.