Terex CC2500-1

Terex CC2500-1 550-Ton Crawler CraneCrawler Carrier: 3-section carrier comprising of carbody and two crawlers. Hydraulic pin connections between crawlers and carbody provide for easy assembly and removal to minimize width and weight for transportationBending and torsion resistant welded structure of box type construction, fabricated of high-strength fine-grain structural steelSide frames: bending-resistant welded structure of high-strength fine-grain structural steel. Track shoes and idler tumblers are fabricated of heat-treated high-strength cast steel. 14 rollers on each side frame with hardened rolling surfaces. Quadro-drive and automatic centralized lubrication is included as standardThe tracks are powered by one hydraulic motor each through closed planetary gear reduction units running in oil bath, equipped with spring-applied hydraulically released holding brakes; the gear units are of extremely compact design to fit within the width of the crawlers. Each crawler is infinitely variable controlled, both independently and in opposite directionSuperstructure: Counterweight: 352,740 lb in combination with 88,185 lb central ballast on carrierA-frame: Hydraulic raising system for A-frame as standardFrame: Torsion-resistant welded structure fabricated of high-strength fine-grain structural steel. Connected to carrier by triple-row roller bearing slew ringDrive: DaimlerChrysler diesel engine type OM 501 LA, 315 kW (420 hp) at 2000 1/min, torque 2000 Nm at 1080 1/min. The engine complies with EUROMOT 3a, EPA T3 and Carb regulations. Pump distribution gearbox with five variable displacement axial piston pumps incl. electronic control system, and gear pumps Rope drums: The standard superstructure equipment includes three rope drums – hoist 1, hoist 2 and boom hoist. The drums are powered by hydraulic motors through closed planetary hear units running in oil bath. All rope drums have spring-applied, hydraulically released multi-disk brakes and non-wearing hydraulic braking for load lowering. Rope ends H 1, 2 and W 1, 2 equipped with quick-connect rope end fittings. Hoist H1 (and optionally H2) is removable to minimize weight for transportationSlew units: Powered by two hydraulic motors through closed, planetary hear unit running in oil bath. Spring-applied, hydraulically released holding brake and non-wearing hydraulic brakingControl system: IC-1: Electronic proportional valve pilot control integrated in stored-program control system incl. diagnostics. 2 color monitors, safe load indicator operated via a touchscreen. Working speeds infinitely variable controlled by the lever position. Automatic power control for optimal utilization of engine outputCabin: comfortable cab with large windscreen and air conditioning. Safety-glazing all around, roof window, self-contained hot air heater, full instrumentation and crane controls. The cab can be tilted back for improved operator view of boom point. A camera system is installed to monitor the rope drums. For transportation, the cab swings in front of the superstructure to minimize widthElectrical Equipment: 24 V d.c. systemAvailable OptionsHydraulic cylinder A-frame: for self-assembly crawlersAssembly jacks: Four hydraulic jacking cylinders on carbody (folding within 9’ 11” width) for easy assembly of crawlersSideways outriggers: For erection of long boom systemsCounterweight carrier: Drive 4 x 2, total weight max. 551,250 lbQuick-connection: Hydraulic quick-disconnect fittings on carrier and superstructure facilitate removal to minimize weight for transportationTrack shoes: Optional width of 3’ 3” and 4’ 11”Call Today! 1-866-493-5797