Terex HC110

110 Ton, 230' Main boom max, 270' main + jib, Std counter weight, 2drums 110 Ton, 230' Main boom max, 270' main + jib, Std counter weight, 2 drumsMACHINERY: Two drums, one main and one auxiliary, orientated in-line; main drum in front, with auxiliary drum behind. Each mounted on separate shafts with single stage planetary gear reduction, independently driven by a hydraulic motor through a planetary reducer. A spring set, hydraulically-released, multi-disc holding brake is mounted inside the hoist motor and is operated through a counter-balance valve. An external ratchet is fitted for locking the drums. Each of the main and auxiliary hoisting drums are grooved for a specific size of wire rope. Drum rotation indicators are present. rotation indicators. Independent swing powered by a hydraulic plunger motor coupled to a planetary reducer with spring-set, hydraulically released multiple disc-brake, mounted on the swing motor. Two-position pin-in-hole lock (manual). Boom hoist with grooved drums including 3/4" (19 mm) diameter wire rope. Drum is powered by hydraulic axial piston motor coupled through a planetary reducer equipped with a spring-set hydraulically released pawl that is automatically actuated when boom is stopped. Engine/machinery enclosures with large access doors. Power up/down and free-fall is standard for main and auxiliary drums. LOWER: Independent hydraulic propel drive unit built into each side frame. 36" (914 mm) crawler shoes. Sealed lubricated track rollers. Retractable crawlers for transportation. ENGINE: Cummins QSB6.7, Tier-3, 185-HP (138 kW) @ 2,200 RPM, 6-cylinder, water-cooled, fuel injected diesel with an intercooled, turbo-charger. engine controls include: one electronic twist grip hand throttle and one foot pedal throttle, 100 gallon (380 liter) fuel reservoir, and heavy duty batteries [(2) 12 volt, 136 Ah]. OPERATOR'S STATION: Completely isolated from the main machinery cab, the operators cab includes: totally enclosed full vision cab with safety glass windows on all sides, windshield wiper/washer, hydraulic controls, sliding side window, flip open top window with wiper/washer, tachometer, Load Moment Indicator (LMI), heat and air conditioning with circulation fan, and am/fm radio. Deluxe operator seating. CONTROLS: Hydraulic-over-hydraulic controls provide instant, positive, and smooth response to the operator’s touch, with a 80 (303 liter) gallon capacity reservoir. Block-up limit control is standard for all hoisting lines. Integrated Load Moment Indicator system (LMI) is standard for main boom and upper boom point. BOOM: Includes 50' (15.2 m) basic 59HI boom consisting of 25' (7.6 m) 59" Inner and 25' (7.6 m) 59" Outer boom section with Offset Tip and extended axle for pile driving. Mechanical boom angle indicator, pendant rigging, and boom hoist wire rope. Boom back-stops and boom over-hoist prevention device. Anti-two block limit controls for main and auxiliary lines. COUNTERWEIGHT: Standard upper counterweight, consisting of (1) lower section weighing 32,000 lbs (14.515 kgs), (1) middle section weighing 12,100 lbs (5.488 kgs), and (2) upper sections, each weighing 4,400 lbs. (1.996 kgs); for a total upper weight of 52,900 lbs. (24.00 kgs) total weight. Removable in four separate sections for transport using a self-contained hydraulic counterweight removal system. Standard lower counterweight consisting of (2) sideframe counterweights, each weighing 12,000 lbs (5,443 kg); for a total lower weight of 24,000 lbs. (10,886 kgs) total weight. All counterweights are removable for transport. A 25 ton single sheave load block grooved for 1" wire rope and lifting slings are included.