Terex RS70100

Terex RS70100 35-Ton Boom Truck.BASIC MACHINE:35 tons (31.8mt) capacity rating. Mainframe consists of all-steel, box construction. Subframe length designed for standard 17' steel tread plate flatbed with stake pockets.Seated position (rotates with crane) operators station (not enclosed) mounted to side of pedestal includes 4 lever crane function control handles, foot throttle and engine start/stop switches - signal horn - bubble level and warning light for high hydraulic oil temperature.Front main "H Beam" frame outriggers independently controlled with an overall extended span of 25'6" (7.8m) to the outside of the pads. 3 position Load Chart.Rear outriggers are "H Beam" frame, out-and-down type with an overall extended span of XX'X6" to the outside of pads.Rotation Planetary gearbox - hydraulic motor driven with 360-degrees of continuous swing rotation (no swing stop)8 lever outrigger control handles on pedestal stand mounted on top of flatbed behind truck cabFront Bumper Stabilizer is standard equipment (requires chassis with optional 24" front frame extension)Hydraulic Oil Cooler frame mounted to underbody is standard equipmentGREER 510 Rated Capacity Limiter system with digital read out display, integrated work area definition program and ATB anti-two block external boom wiringStandard Color Scheme: Terex Gray (Mainframe Pedestal, Subframe, Front and Rear Outriggers, Extending Boom Sections, Boom Tip Head, Flatbed)Terex White (Turret, Base Boom and Jib) - Terex Black (Control Stand, Operators Platform and Guards, Access steps and ladders)BOOM:Four section KEEL designed boom, full power, mechanically synchronized with 30'6" to 100' maximum length (9.3 - 30.5m) and maximum tip height of 110' (33.5m)Each KEEL section is high-strength, steel plate construction designed to optimize the strength to weight ratio.Boom sections are color stripe coded to corresponding load chart.Boom Tip head is equipped with 3 Bottom Head sheaves - includes one and two-man steel workbasket attachment point. HYDRAULIC SYSTEM: High capacity, full flow oil filtration system with a 90 gallon (342L) capacity reservoir and internal suction filter screen.Three section vane pump is PTO driven and allows independent functioning of Boom, Winch and Swing operations.The combined system output is 57 gpm at 2300 rpm pump speed and up to 3000 psi operating pressures.The return line filter is 10 micron and is externally mounted to the reservoir.HOIST:Standard Two-Speed Planetary Hoist - hydraulic motor driven - Maximum Line Pull 15,000lbs / 6,950lbs @ low speed/high speed settingOptional choice of 350' (106.7m) of 5/8-in (15.9mm) Regular Lay or Rotation Resistant wire ropeMaximum line speed of 110 / 250 fpm low speed /high speed.Standard grooved drum with tapered flanges for improved spooling.MANUALS: Hard Copy Operators Manual - (1) CDROM includes Operators/Parts/Schematics/Greer/Wire Rope (manuals)- (1) CDROM includes AEM Safety VideoCall Today! 1-866-493-5797