McClung-Logan Equipment Co Inc. is selling this:

Bandit 3680 Beast Recycler

Back

Make: Bandit
Model: 3680 Beast Recycler
Category: Agriculture / Forestry Machinery / Wood Splitter & Wood Chipper
Year: 2011
Location: North America: United States of America
4601 Washington Blvd., MD21227, BALTIMORE, - USA
Condition: Used
Price: Price on Request

Contact Seller

Description

3680 Beast Recycler - AVAILABLE IN MD, VA, DE
Machine Capacity
Grinding Capacity: 35" diameter capacity
Mill Opening: 35" X 60"
Dimensions
Length: 39'
Width: 9' 7"
Height: 13' 3"
Weight: Approximate 59,000 pounds
Noise Level
Noise Level: Approx. 80 decibels at 50’ 360 degrees around unit or less, depending on species of wood being
chipped.
Frame
Frame: Frame is 1/4" thick steel with 20" deep formed high tensile steel plate, and 3/8" thick C-channel, 18" deep
with 7" reinforced channel.
Hitch
Pintle Ring: 3" pintle ring with (2) safety chains with hooks
Tongue Jack
Stabilizer: One hydraulic front stabilizer
Axle
Axle: (3) 25,000 pound air brake axles
Tires
Tires/Rims: (6) 385/60R 22.5, load range "H" tires mounted aluminum rims
Lighting System
Lighting System: 12 volt system with LED taillights
Engine
Manufactuer Options: manufacturer's exhaust system, air cleaner system, cooling system, and electrical system.
Horsepower Range: Cat, Cummins, and John Deere ranging from 440 horsepower to 800 horsepower.
Engine Items: Engine items Include tachometer and hour meter, engine manufacturer's gauges: such as high temp/low
oil pressure shut down system.
Belt Guards
Belt Guards: To enclose all drive systems, guards shall have seams welded inside and out. All guards are easily
removed by 3/8” NC grade 8 hardness bolt.
Infeed Conveyor
Infeed Conveyor: Horizontal slat style infeed conveyor 20' long x 60" wide driven by (1) 24 CID hydraulic motor with
gearbox and chain. Also includes (2) side infeed wings.
Infeed Conveyor Speed: 3-speed infeed conveyor controlled by a reversing auto feed system
Feed Wheel
Dimensions: (1) 24" diameter by 5' wide floating feed wheel internally driven by a hydraulic motor/gearbox
combination.
Cutter Mill
Dimensions: 42" diameter X 63" wide cutter mill consisting of 60 cutter bodies and teeth. Mill must cut material apart
by rotating down toward the material.
Drive: (3) 5/5VF2000 banded Kevlar belts
Bearings: (2) 4 5/16" diameter spherical roller pillow block bearings
Shaft: 6" diameter, coaxially mounted inside 24" diameter by 1" pipe connected by end plates
Gate
Gate: (1) replaceable, hydraulic operated concave gate 10" X 63" (Wide variety of gates available to choose
from ranging from 1" to 5")
Screen
Screen: (1) replaceable concave screen 25" X 63" (Wide variety of screens available to choose from ranging from
1" to 7")
Anvil
Anvil: Full width adjustable anvil constructed with structural steel
Augers
Augers: Must have 10 augers to capture and feed the debris falling from the feed end of the infeed conveyor into
the cutter mill.
Discharge
Discharge : 30' long x 4' wide (2-speed) discharge with a discharge height of 17' 7"
Dust Suppression System
System: Consists of (2) 1 1/2 GPM nozzles spraying into the cutter mill, and (1) 1 1/2 GPM nozzle spraying over
the feed wheel. Also must include (2) 1/2 gallon nozzles spraying on the discharge belt.
Fire Suppression System
System: (3) heat actuated fire suppression bombs to be mounted as follows: (inside the control cabinet, inside the
hydraulic cabinet, and on the bottom of the hydraulic tank).
Radiator Screen
Radiator Screen: High capacity radiator screen
Hydraulic Shutdown
Shutdown: Includes (4) electric over hydraulic shut down switches located on all 4 corners of machine.
Screen Changing Arm
Arm: Assists operator with replacing screens from inside of the cutter mill.
Tether Remote
Remote: Radio remote control with tether back-up. Functions include yoke up/down, feed forward/reverse, engine
stop, engine throttle up/down, gate open/close.
Hydraulic Tank
Hydraulic Tank: 140 gallon steel hydraulic tank, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Fuel Tank
Fuel Tank: 500 gallon steel fuel tank, magnetic drain plug, rubber shock mounted, and aluminum sight gauge
Paint
Standard Colors: Standard colors: Bandit yellow, Cat yellow, John Deere Green, Alert Orange, Black, or white
Air Compressor
Compressor: 11 horsepower gas powered, with 10 gallon air tank complete with fittings, impact wrench, and swivel
sockets.
Tool Boxes
Tool Boxes: (2) Lockable control and storage compartments
Fire Extinguisher
Fire Extinguisher: (1) fire extinguisher to be mounted inside control cabinet
SerialNumber : 4FMUS4035AR001727
Hours : 873