- Make
- Caterpillar
- Model
- 12H
- Category
- Motor Grader
- Year
- 2006
- Location
-
Asia: China
China (Shanghai) - Condition
- Very good condition
- Price
- Price on Request
SHANGHAI KAIYAN CONSTRUCTION MACHINERY TRADE CO.,LTD
is selling this:
Caterpillar 12H
Description
- Specification
- Engine
- Make ----Caterpillar
- Model ----C-9 ETA VHP
- Net Power Gear 1-2 ----145 hp 108 kw
- Net Power Gear 3-4 ----165 hp 123 kw
- Power Measured ----2000 rpm
- Net Power Gear 5-6 ----165 hp 123 kw
- Number of Cylinders ----6
- Net Power Gears 7-8 ----165 hp 123 kw
- Max Power ----165 hp 123 kw
- Displacement ----537 cu in 8.8 L
- Operational
- Std Operation Weight - Front Axle ----8346 lb 3784 kg
- Std Operation Weight - Rear Axle ----22974 lb 10416 kg
- Std Operation Weight - Total ----31320 lb 14200 kg
- Max Operation Weight - Front Axle ----13744 lb 6234 kg
- Max Operation Weight - Rear Axle ----32074 lb 14549 kg
- Oil System Fluid Capacity ----7.1 gal 27 L
- Max Operation Weight - Total ----45818 lb 20783 kg
- Fuel Capacity ----100 gal 378 L
- Cooling System Fluid Capacity ----11.6 gal 44 L
- Hydrauilc System Fluid Capacity ----19.5 gal 74 L
- Rear Diff/Final Drive Fluid Capacity ----12.2 gal 47 L
- Circle Gearbox Fluid Capacity ----1.8 gal 7 L
- Tandem Case Fluid Capacity (each) ----16.9 gal 64 L
- Tire Size ----14.00-24 12PR
- Operating Voltage ----24 V
- Alternator Supplied Amperage ----75 amps
- Transmission
- Type ----direct drive power shift
- Number of Gears - Forward ----8
- Number of Gears - Reverse ----6
- Max Speed - Forward ----27.4 mph 44 km/h
- Max Speed - Reverse ----21.6 mph 34.7 km/h
- Steering
- Articulation L/R ----50 degrees
- Turning Radius ----24.3 ft in 7.4 m
- Front Axle
- Wheel Lean ----18 degrees
- Oscillation - Total ----32 degrees
- Ground Clearance ----2 ft in 594 mm
- Hydraulic System
- Pump Type ----variable piston
- Pump Flow ----51.9 gal/min 196 L/min
- Relief Valve Pressure ----3500 psi 24150 kPa
- Moldboard
- Moldboard Width ----12 ft in 3658 mm
- Moldboard Height ----24 in 610 mm
- Moldboard Thickness ----0.87 in 22 mm
- Max Depth of Cut ----28.9 in 735 mm
- Side Shift Left ----20.6 in 524 mm
- Side Shift Right ----26 in 660 mm
- Blade Pull at Max Weight ----28867 lb 13094 kg
- Blade Down Pressure ----23807.7 lb 10799 kg
- Circle
- Diameter ----60.2 in 1530 mm
- Rotation ----360 degrees
- Shift Left ----27.4 in 695 mm
- Shift Right ----28.7 in 728 mm
- Max Reach Outside Tires - Left ----73.6 in 1859 mm
- Max Reach Outside Tires - Right ----71.2 in 1809 mm
- Max Lift Above Ground ----18.9 in 480 mm
- Blade Tip Angle - Front ----40 degrees
- Blade Tip Angle - Rear ----5 degrees
- Dimensions
- Height to Top of Cab ----10.2 ft in 3107 mm
- Overall Length 28.1 ft in ----8571 mm
- Width Over Tires ----8 ft in 2440 mm
- Wheelbase ----20 ft in 6086 mm
- Blade Base ----8.4 ft in 2575 mm
- Tandem Axle Wheelbase ----5 ft in 1523 mm
- Rear Ground Clearance ----1.1 ft in 341.5 mm
- Front Ground Clearance ----2 ft in 594 mm
- feature1 : EROPS,
- feature2 : AIR CONDITIONER,
- feature3 : CAB, HIGH PROFIL,
- feature4 : SIDE SHIFT,
- feature5 : TIP CONTROL,
- feature6 : SCARIFIER, FRONT,
- feature7 : DIFF LOCK/UNLOC,
- feature8 : LIFT GROUP,
- feature9 : SLIPCLUTCH,
- 1.Very good condition,ready for work.
- 2.Reasonable price.
- 3.Low working hours.
- 4.Located in Shanghai.
- 5.Clean and nice,be ready to sell.
- 6.Perfect service.Include:
- 1)pick you from airport
- 2)book hotel for you
- 3)guide you how to visit Shanghai
- If you need more information, please do not hesitate to contact us.
- Welcome to visit our factory to choose and check your preferred machine.
- Contact person: Linda
- Email: kaiyanmachine@hotmail.com
- Skype: live:kaiyanmachine
- Mobile phone:+8918916061263
- Tel : +86 021 52210670
- Fax : +86 021 52210670
$98,083 USD
$128 USD
$197,215 USD
*
Ø
▼
Similar Machines
(Similar models of the same year with comparable operating hours.)
