Caterpillar D6T LGP

2013 Cat D6T LGP, VPAT, 6 way blade, 3,320 hours, 686 hours were at Idle. Cat Accugrade, ARO, GPS Ready. Erops, A/C, Diff Steer, good UC, Original, Super Clean Machine. Rent / Lease or Buy.

· KSB serial number prefix
· 3,320 Total Hours
· 686 hours where at Idle, as indicated by ECM
· Only 2,634 actual hours operating time for this machine
· 1,482 Average lifetime RPM, as indicated by ECM
· 58% overall Lifetime Load Factor, as indicated by ECM
· 6.77 lifetime average fuel rate per hour, as indicated by ECM
· Very Low utilization stats

· Original Paint, Original condition machine
· GPS, Factory Accugrade, ARO Ready Option installed
· Enclosed Cab, A/C, Heat
· Diff Steer
· PAT, Power Angle Tilt (6 way) Blade
· Rear drawbar

· Cat C9.3 Accert Engine, 230 HP
· 46,800 Pounds operating weight
· 13’7” blade width, 9’10” width of tractor

Undercarriage measures, Cat Regular HD (Based on Cat spec 120% being New)
· Rail/Chains Height measure 46% Remaining
· Links/Bushings on rails measure 38% Remaining
· Pads/Grousers – 60% Remaining, 31” wide
· Sprockets – 56% Remaining
· Front Idlers – 70% Remaining
· Rear Idlers – 90% Remaining
· Bottom Rollers - average 50% Remaining

· This machine qualifies for Rent, Lease & Finance options

· GPS, Grade Control, Total Setup Options Available for this Unit.

This machine is super straight & clean, No leaks, No faults. All pins & bushings in blade are tight. Good solid, original condition machine all the way around. Search the market and compare prices, and quality. This machine will come to the top. We can do a $12,000 per month Rent/Rent-Purchase Option, Lease, or Finance deal, at excellent rates if interested.

This machine is currently getting an extensive pre sale work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other pre sale procedures. This machine will be ready to go. Please call or email for additional information that we can email you –

We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and video, available for this machine, on our website, www.jjscheckel.com, Priced to sell!