I-10 EQUIPMENT SALES is selling this:

Dragon

Make
Dragon
Category
Trucks / Semi-Trailer Truck
Year
2016
Location
North America: United States of America
6642 Industrial RD, 77705, Beaumont, - USA
Condition
Used - very good condition
Price
Price on Request

Description

  • Product Description
  • DESCRIPTION: 9500 GAL DOUBLE CONICAL TRAILER FOR CRUDE, INSULATED
  • TYPE: DOUBLE CONICAL, DOT 407 SPEC
  • CAPACITY: 9500 GALLONS, PLUS 2%
  • COMPARTMENT: 2 COMPARTMENT, 50% FRONT, 50% REAR, PRESSURE EQUALIZED
  • COMMODITY: UNSPECIFIED FLUIDS
  • DESIGN PRESSURE: 25 PSI INTERNAL, 45 PSIG HYDROSTATIC TEST
  • LENGTH: 476” HEAD SEAM TO HEAD SEAM, 512” (42’-8”) OAL
  • SHELL: 5454 H32 ALUMINUM 70” I.D. END, 82” I.D. CENTER, 1 CIRCUMFERENTIAL SEAM AT CENTER
  • HEAD: 5454 TEMPER 0 ALUMINUM, ASME F&D 5/16”
  • BAFFLE: 4 – REINFORCED FLARED & DISHED ¼” 1 – SOLID BAFFLE COMPARTMENT DIVIDER ALL WELDED ON BOTH SIDES
  • WELDS: INTERNAL – AS WELDED, EXTERNAL – SMOKE AND DISCOLORATION REMOVED
  • STIFFENER RINGS: 11-2” X 5” ALUMINUM CHANNEL, EXTERNAL SOLID WELDED
  • MANWAY: 2- KNAPPCO LM1151 20” MANHOLE WITH 6 CAM OVER LATCHES
  • CLEANOUTS: 4 – 3” MALE PIPE NIPPLE WITH STAINLESS STEEL ON TOP CENTER LINE, 1 IN EACH BAFFLE SPACE, 3 SIDE CLEANOUTS PER SIDE; FRONT, MIDDLE AND REAR
  • OVER TURN PROTECTION: 2 – SPILL DAM AT TOP MANWAY WITH DRAIN HOSE, INCLUDES LEVEL GAGE PORT, RELIEF VALVE AND VAPOR RECOVERY VALVE
  • LIGHTS: FULL DOT LIGHTS, LED SEALED LIGHTS, HARNESS AND JUNCTION BOX WITH TERMINAL STRIP
  • SUSPENSION: WATSON CHALIN INTEGRA TI300 (LIGHT WEIGHT INTEGRATED) AIR RIDE, 30,000 LB PER AXLE, TRIPLE AXLE
  • AXLES: 25,000 LB ROUND W/OUTBOARD DRUMS, DURA-LIGHT LIGHTWEIGHT HUBS AND CAST LITE DRUMS
  • WHEELS: 10 HOLE, ALUMINUM , HUB PILOT, 8.25 X 24.5
  • TIRES: 11R-24.5 RADIAL, DUAL
  • BRAKES: 16 1/2 X 7 WITH SPRING PARKING, AUTO SLACKS, WABCO 4S-3M ABS SYSTEM UPPER 5/16” BOLSTER PLATE, REVOLVER STYLE BOLT ON
  • COUPLER: ADJUSTABLE, 49” TRUCK 5TH WHEEL HEIGHT
  • LANDING LEGS: 2 SPEED, HEAVY DUTY, HIGH CAPACITY LIFT, 14” TRAVEL, JOST A400-T-14
  • BUMPER: HEAVY DUTY PER DOT REQUIREMENTS WITH PINTLE HITCH REAR TOW HEAVY DUTY DEE RINGS INSTALLED ON REAR OF EYES SUSPENSION BOX END CAPS
  • FENDERS: 3/4 FENDERS ON FRONT, SINGLES ON REAR
  • MUD FLAPS: ANTI SAIL
  • HOSE TUBE: 1– 8” X 21’ HOSE TUBE ROAD SIDE, 1-8” X 21’ DOUBLE HOSE TUBE CURB SIDE
  • COATING: EXTERIOR, ALL STEEL SURFACES WHITE METAL STEEL GRIT BLAST, 2 MIL PROFILE (SP-6), PAINTED METALLIC SILVER WITH HIGH SOLIDS POLYURETHANE, 4-6 MIL DRY FILM THICKNESS.
  • LINING: CHEMICAL RESISTANT EPOXY LINER
  • PLACARDS: 4 – SLIDE IN PLACARD FRAMES, SIDES AND REAR PIN ON
  • FIRE EXTINGUISHER: 1 – 10 LB DRY CHEMICAL FOR HYDROCARBONS
  • BOTTOM VALVE: 2 – 6” X 4” HIGH FLOW SHORT RADIUS 90 DEG AIR OPERATED EMERGENCY VALVE WITH SHEAR SECTION AT BOTTOM CENTER
  • DISCHARGE PIPE: ROPER 3548MHBFRV (TRIPLE LIP SEAL) WITH BOTTOM OUTLET TEEING BOTH SIDES WITH SURE SEAL TTMA BUTTERFLY VALVE WITH MALE CAMLOCK ADAPTER. INLET TO TANK HOSE. HARD LINE TRAVELS REAR INTO CROSS WITH SIDE LOAD AND THRU TO LATERAL. FRONT COMPARTMENT 45 LATERAL TO REAR COMPARTMENT WITH ISLOATION JUST REAR OF LATERAL. ALL PLUMBING IS 4”. ADD ISOLATION VALVE FORWARD OF CROSS GOING TO PUMP INLET.
  • VAPOR RECOVERY: 3” AIR OPERATED BUTTERFLY VALVE AT TANK TOP IN EACH COMPARTMENT JOINING INTO SINGLE CONTOUR PIPE ON DRIVER SIDE WITH CONTOUR PIPE TO BOTTOM OF TANK, 3” CONNECTION AT DRIVERS SIDE AND REAR WITH BUTTERFLY VALVE, CAM LOCK AND CAP. ADD CURB SIDE VENT. DRIVER SIDE VENT REDUCED TO 2” WITH HOSE TO TERMINATE IN CUSTOMER SUPPLIED BUCKET
  • DIRECTIONAL VALVE: HYDRAULIC PUMP DIRECTIONAL CONTROL VALVE MOUNTED ON CURB SIDE NEAR LANDING GEAR
  • RELIEF’S: 2-DOT SPECIFICATION, FORT VALE STAINLESS STEEL PRESSURE/VACUUM RELIEF VALVE, LOCATED IN SPILL DAM WITH AIR KIT AND GAUGE
  • LEVEL GAUGE: 2 – TITAN LOGIX TD80 DUAL PROBE, 1 EACH COMPARTMENT, DISPLAY LOCATED ON ROAD SIDE FRONT FENDER IN STAINLESS STEEL ENCLOSURE
  • WORKLIGHTS: 6 BETTS BRAND EXPLOSION PROOF WORKLIGHTS WITH MAIN SWITCH FOR ALL LIGHTS, 1 DOME LIGHT IN TOOLBOX
  • CALIBRATION: CALIBRATED IN BBLS
  • THERMOMETER: 2- CONTACT THERMOMETER, 1 EACH COMPARTMENT, ON CURB SIDE
  • GAUGE: 60 PSI GAUGE INSTALLED IN VAPOR RECOVERY LINE
  • LADDER: BOLT ON LADDER TO SPILL BOX WITH TOP PLATFORM STEP, INSTALLED ON PASSENGER SIDE WALKWAY ALONG PASSENGER SIDE JOINING BOTH SPILL DAMS
  • WALKWAY: 24” OF WALKWAY ON TOP OF TANK TO ALL CLEANOUTS
  • CABINET: 24 X 24 X 48 ALUMINUM TOOL BOX MOUNTED DRIVER SIDE AHEAD OF SUSPENSION
  • INSULATION: 5” R19 AROUND ALL OF BBL WITH 3” ROXEL SPACER ON ALL RINGS
  • JACKET: .063 ALUMINUM END CAP WITH .04 MAIN SHELL ADDITIONAL SIDE MOUNTED FLOAT INDICATOR AND THERMOMETER
  • FEATURES: PROTECTED BY SURROUNDING 1/2” X 2” GUARD RING 1 – IN EACH COMPARTMENT.
  • 24 X 24 X 48 ALUMINUM TOOL BOX MOUTNED DRIVER SIDE.
  • TITAN LOGIX LEVELING SYSTEM AVAILABLE UPON REQUEST
  • DAVIT ARM FOR HYDRAULIC LINES ON TOP OF FRONT RING
  • ADDED OPTIONS: CUSTOMER SPECIFIC ITEMS
  • ADD STATIC REEL, BUCKET HOLDER (ROAD SIDE), ADD CHAIN
  • HANGERS (CURB SIDE), HD POWER SUPPLY FOR FUTURE
  • CENTRIFUGE, ISOLATION VALVE FORWARD OF TOP CROSS
  • Suspension : Air Ride
  • Composition : Aluminum
  • Length : 39
  • Tires : 11R24.5
  • Trailer Status : Available
  • Trailer ID : CB604E4D-FAC9-E511-8BA7-5CF3FC7ABA36