- Make
- Dragon
- Category
- Vehicles / trucks: Trucks: Semi Trailer
- Year
- 2016
- Location
-
North America: United States of America
6642 Industrial RD, 77705, Beaumont, - USA - Condition
- new
- Price
- Price on Request
I-10 EQUIPMENT SALES
is selling this:
Dragon
Description
- Product Description
- **Price does not include 12% FET (Federal Excise Tax).
- 60 Ton 4 Axle Heavy Haul Trailer
- Specifications:
- Type: Low Profile Flat Bed with removable neck.
- Payload: 60 tons (120,000 lb) distributed over 16 ft.
- Overall length: 59’ – 8”
- Deck length: 45’ – 0”
- Deck width: 8’ – 6” (102”)
- Deck height: 3’ – 5” (41”)
- Deck Camber: 2″ nominal, neck to tail.
- King Pin Settings: 16” and 34”
- Swing Clearance: 8’ – 6” (102”) and 10’ – 0” (120”).
- Frame: 4 beam design. Fabricated beams from a A514 T-1 high tensile steel flanges and webs. Main beams boxed reinforced at critical deck transition, 2-1 minimum safety factor at maximum payload stresses.
- Front Deck: 22′-8″ L, 2″ apitong attached at ends and every other cross member.
- Rear Deck: 22′ -4″ L including tail roller, 1/4″ steel plate deck, continuous welds on top, intermittent welds on under side.
- Neck: Mechanical removable with roller at rear, 2 King Pin locations, spare tire carrier each side. • Rear Deck Roller: 8″ SCH 160 pipe (8 5/8″ OD) with double spherical bearings, 2 sets of over load rollers, grease fittings on main roller and overload rollers.
- Neck Roller: 6″ SCH 160 pipe (6-5/8″ OD) with double spherical bearings, grease fittings, cable guide flanges.
- Deck Load Rollers: 6″ SCH 160 pipe (6-5/8″ OD) with double spherical bearings, grease fittings, air operated to raise, spring load to lower, used to assist in unloading skidded loads off the rear.
- Pin Pockets: 1 each side at rear on 45 degree angle with 1/2″ grab hooks, 2 each side in main deck inside outer beam, 7 each side on outside of outer beam.
- D Rings: 15 on each side, outside of outer beam, 2 inside of neck.
- Outriggers: 11 each side, forged heavy duty, locking against beam and at 90 degrees to beam
- Traction Cleats: 3/4″ x 1″ A514 T-1 steel, continuous welds solid on up hilltop, intermittent welds on downhill side.
- Suspension: 30,000 lb. (per axle) air ride, air lift on front and rear axles, manual dump all axles, travel limit straps on all axles.
- Axles: 5 -25,000 lb. round with outboard drums.
- Tires: 255R/70 x 22.5 Radial
- Brakes: 16 1/2 x 7, spring parking brakes on 4 axles, auto slack adjusters
- Bumper: 4″ SCH 80 pipe with 4 -D rings
- Mud Flaps: Anti Sail
- Lights: Full DOT lights, sealed led lights.
- • Coating: All surfaces near white metal steel grit blast, 2.5 ml profile (SP-6), primed and color coated (before decking) with high solids polyurethane, 4-6 ml dry film thickness.
- Suspension : Air Ride
- RearAxles : Quad
- AxleType : Fixed
- Length : 59
- Width : 102
- Composition : Combination
- FloorType : Wood Floor
- Tires : 255R/70x22.5
- ForSaleListPrice : 79500