I-10 EQUIPMENT SALES is selling this:

Dragon

Make
Dragon
Category
Vehicles / trucks: Trucks: Semi Trailer
Year
2016
Location
North America: United States of America
6642 Industrial RD, 77705, Beaumont, - USA
Condition
Used
Price
Price on Request

Description

  • Description: 10,600 gal. LPG/NH3 Transport Trailer
  • Specifications: ASME Section VIII, Division 1 NFPA58, 49 CFR 178.337 (specification mc-331)
  • Capacity: 10,686 water gallons
  • Commodity: Liquefied Petroleum Gas / Ammonia
  • Design Pressure: MAWP: 265 psi
  • Design Temp: -20°F/125°F
  • Length: 437” head seam to head seam, 44’ OAL
  • Shell: SA517, 80” ID
  • Head: SA517, ASME Hemispherical
  • Baffles: 2 – Aluminum bolt-on
  • Welds: RT-1 (100% radiography) Wet magnetic particle tested per USDOT requirements, Post weld heat treated per ASME/USDOT requirements
  • Manway: 16” manway with O-Ring seal, rear head
  • Suspension: Watson & Chalin Integra 30K air ride suspension, 50” axle spacing, 19” ride height.
  • Axles: 25,000 lbs round w/ outboard drums, dura-light lightweight hubs and cast lite drums
  • Wheels: 10 hole, steel, 8.25 x 24.5 hub pilot wheels
  • Tires: 11R24.5 radial, single chip and cut resistant
  • Brakes: 16 ½” x 7” Pads, auto slacks, 4S/2M Merritor-Wabco ABS system
  • Upper Coupler: 5/16” bolster plate, bolt on adjustable
  • Landing Legs: 2 speed, heavy duty, high capacity lift
  • Rear Bumper: Heavy duty per dot requirements with under-ride protection
  • Fenders: 3/4 fenders on front, full fenders on rear. Bolt on front fender mount arms and rear fender supports
  • Mud Flaps: MTC anti-sail
  • Hose Tube: 2 - 8" x 20' aluminum hose tubes, one each side complete with 16” long external reinforcement sleeves and cast doors at each end of each hose tube.
  • Coating: Sand blast to white metal, epoxy prime (2-3 mil), top coat-white (2-3 mil), clear coat (1.5-2 mil). 5.5-8 mil dry film thickness.
  • Placards: Decals and placards installed in accordance with all USDOT regulations.
  • Extinguisher: 1 - 20# fire extinguisher with bracket
  • Chock Block: 2 – Chock blocks with holder mounted on rear
  • Electrical: 12 Volt Non-incendive trailer light kit supplied and in full compliance with DOT regulations.
  • Trailer Electrical and Air Connections – Standard 7 Way nose box mounted road side front
  • NOZZLES/PIPING/VALVES:
  • Relief Valves: 2 – 3” internal safety relief valves. Located at center of trailer (TDC) with rollover protection.
  • Liquid Withdraw: 3" internal valve - Operated by a mechanical lever assembly on curb side of unit 2" globe valve with ACME adapter (both curb-side and road-side)
  • Vapor/ Top fill: 3" internal valve - Operated by a mechanical lever assembly on curb side of unit 2" globe valve with ACME adapter (both curb-side and road-side)
  • Pump feed: 4" internal valve - manually opened via control handle on valve
  • Pump discharge: 2" globe valve with ACME adapter (both curb-side and road-side).
  • LPG Pump: Blackmer pump (hydraulically driven)
  • Bleed/ Blowdown: 1/2” bleed valve provided at each manual valve and piped to safe area (top of trailer) via stainless steel tubing
  • Level gauge: Float gauge, 4” dial.
  • Pressure gauge: 2-1/2’ dial, 0-300 psi
  • Thermometer: -40˚F/160˚F
  • Fixed LL Gauges: 83%, 85%, 86.5%, and 90%
  • Emergency System: Emergency shutdown valves will be located front street side & rear curb side
  • Suspension : Air Ride
  • RearAxles : Tandem
  • Composition : Steel
  • Tires : 11R24.5
  • Gallons : 10600
  • ForSaleListPrice : 135500