STANDREW is selling this:

LINIA WEINIG DO PRODUKCJI FUTRYN LISTEW itd. z drewna lub MDF

Back

Model: LINIA WEINIG DO PRODUKCJI FUTRYN LISTEW itd. z drewna lub MDF
Category: Construction / Other, Unspecified, and Specialty Equipment / Other
Location: Europe (Continental): Poland
Mojusz 51a, 83-334, Miechucino, - Poland
Condition: Used - reconditioned
Price: Price on Request

Contact Seller

Description

STATEMENT OF TECHNICAL LINE;
FEEDER hydraulic shearer:
- Feeder for automatic loading plate package for cutting the saw FlrxiRip
- Lifting capacity of 4000kg
- Power hydraulic pump connected automatically with saw blade control FlexiRip
Ripsaw WEINIG FlexiRip 3200
- Cut length 3200 mm
- Year 2005
- Control Panel
Technical data:
- Cut length 3200 mm
- Wheel diameter 450 mm - spindle diameter 80 mm
- Maximum cutting depth 125 mm
- Voltages of 400 V, 50 Hz
- Main Engine 15 kW
- Turnover shield 2890 rev / min
- Nominal pressure of 6 bar
- The engine feed 2.2 kW
- The motor of 0.55 kW guide
- The cutting speed of 80 m / min
Series WEINIG FlexiRip:
The machine has an automatic plate loading
Efficiency and high performance
Optimal use of wood
High safety
Integrated with slitting line
Wielopiła Raimann ProfiRip KM 310 M
- Year 2006
Technical data:
- Maximum cutting width 310 mm
- The maximum width of 700 mm passage element
- Maximum cutting height 120 mm
- Track width equipped with a cap to 340 mm MDF
- Minimum cutting height 10 mm
- Maximum wheel diameter 360 mm fi
- The minimum disc diameter of 280 mm fi
- 80 mm diameter sleeve included
- The QuickFix
- Feed speed 5-35 m / min
- Main Engine 37 kW
- The engine feed 1.3 kW
- Voltage 400 V, 50 Hz
WEINIG moulders POWERMAT 1000
TECHNICAL PARAMETERS :
- Automatic system tray
- Control touch screen WEINIG system Povera COM function software system PowerCom Plus
- Electronic LED readouts to all settings
- Width 20 -230 mm
- Working height 8 -160 mm
- Spindles fi 40
- Liquid feed 6-36 m / min adjustable desktop
- Pneumatic załanczana roller before the 1st bottom tool "high- low"
- The engine feed 6.3 kW
- Automatically adjusts the thickness of the planing motor 0.75 kW
Spindles - 6 pieces arranged: BOTTOM + RIGHT + LEFT + TOP + BOTTOM + UNIVERSAL
1. The spindle horizontal bottom - 7.5 kW, 12,000 rpm / min.
2. The head of law department - 7.5 kW 12000obr / min PowerLock system.
3. Head left plummet - 7.5 kW 12000obr / min PowerLock system.
- CAS electronic digital display axial setting,
4. The head horizontal top - 7.5 kW 12000obr / min PowerLock system.
- CAS DigiSet - electronic digital display,
- Pneumatically adjustable pressure-shoe
5. Lower horizontal - 7.5 kW 12000obr / min PowerLock system.
- CAS DigiSet additional digital display adjustment
and - pneumatically pressure-shoe regulkowany
6. Head Universal 360s 12000obr -7.5 kW / min PowerLock System
- The possibility of a wielopiła for cutting
- The feed 4 upper rollers pinch of milled steel
- Two rolls of rubber pulling the top
- Pneumatic clamping system of feed roller
- Feed drive for a cardan shafts - roll in the lower table-driven
- Automatic adjustment of the desktop on thickness
- Touch control panel
The entire line is set. equipped with a system of automatic feeders for input and output
Very good technical condition.