Other DSG

■Features
These are epoch-making solenoid operated directional valves of high pressure, high flow which have been developed
incorporating a unique design concept into every part of the valve including the solenoid. With wet type solenoids, these
valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valve.
●Wide Range of Models
Choose the optimum valve to meet your needs from a large selection available.
The DSG-03 50 design series solenoid operated directional valves are classified into the two basic models.
●Standard type.....Useable at high pressure: 31.5 MPa (4570 PSI) and high flow: 120 L /min. (31.7 U.S.GPM)
●Shockless type....A noise at spool changeover and a vibration in piping can be reduced to a minimum.
●Stable Operation
With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation.
■Solenoids
●Solenoid Connectors (DIN connector)
The solenoid connectors are conform to the international standard ISO 4400 (Fluid power systems and components-Three-pin
electrical plug connectors-Characteristics and requirements).
●AC Solenoids
50 to 60 Hz common service solenoids do not require rewiring when the applied frequency is changed.
●DC Solenoids (Reputable K-series)
These DC solenoids have surge absorbers for K-series functions. The three advantages of them are as mentioned below:
1. Since surge voltage can be controlled to a very low figure, electric control devices, such as a computer, can be used without any
interference like noise.
2.There being no spark between contacts, the life of the relay becomes longer.
3.Time lag for spool return after de-energisation of the solenoid is very short.