QINGDAO PROMISING INTERNATIONAL CO., LTD. is selling this:

Qingdao Promising CPCD30

Make
Qingdao Promising
Model
CPCD30
Category
Forklifts / Rough Terrain Forklift Truck
Year
2014
Location
Asia: China
ROOM G 24th FLOOR TIANZHI INTERNATIONAL BUILDING, QINGDAO FREE TRADE ZONE, 266555, QINGDAO, - China
Hours
2
Condition
new
Serial Number
20141027CPCD30
Price
Price on Request

Description

  • 3.0T Rough Terrain Forklift Truck
  • 3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, 3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, cross-country forklift truck capacity 3.0T, 3000kg capacity off-road forklift truck, rough terrain fork lift, rough terrain fork lifts, 3 ton rough terrain fork lift, 3.0 ton rough terrain fork lift truck, 3 tonne rough terrain forklift
  • Main features:
  • 1. A larger ground clearance of the chassis enables the rough terrain forklift truck to overcome many kinds of complex terrain;
  • 2. The off-road mobility is enhanced through by driver wheels with the MPT multi-function tires, wide base and cross-country tread pattern;
  • 3. Uses the integral-type combination instruments, the fuse box places in left side of the steering wheel to make it easy to replace. The rough terrain forklift truck is also installed with a cigar lighter;
  • 4. A yellow caution light. Outlay air filter and inside air filter increase the purification performance greatly;
  • 5. Adopting Xinchang A498 Engine to ensure the powerful performance;
  • 6. Adjustable damping seat with safety belt.
  • Technical Specifications:
  • Power Type: Diesel
  • Rated Load Capacity: 3000kg
  • Load Center: 500mm
  • Standard Lifting Height: 3300mm
  • Mast Tilt Angle (Forward/Backward): 10/12deg.
  • Front Overhang: 600mm
  • Wheelbase: 1850mm
  • Wheel Tread (Front/Rear): 1350/1290mm
  • Service Brake: Hydraulic-Foot Pedal
  • Parking brake: Mechanical-Hand Lever
  • Lifting Speed (Full-load/No-load): 380 / 520mm/s
  • Lowering Speed (Full-load/No-load): Full-load 300mm/s
  • Travel Speed (Full-load/No-load): 20 / 25km/h
  • Max. Gradeability (No-load): 20%
  • Engine Model: XINCHANG A498BPG
  • Rated Power of Engine: 45kW / 2500rpm
  • Max. Torque/rpm of Engine: 193Nm / 1800rpm
  • Displacement of Engine: 3.168L
  • Battery Voltage: 12V
  • Battery Capacity: 100Ah
  • Transmission Type of Gearbox: Hydraulic
  • Gears Shift (F/R) of Gearbox: I/I
  • Tyre Type: Pneumatic Tyres
  • Tyre Model - Front: 14-17.5-14PR
  • Tyre Model - Rear: 10-16.5-10PR
  • Service Weight: 4600kg
  • Free Lift: 120mm
  • Fork Dimensions (TxWxL): 40x125x1070mm
  • Overall Length (without Forks): 2930mm
  • Overall Width: 1800mm
  • Overall Height - Mast Extended: 4650mm
  • Overall Height - Mast Lowered: 2342mm
  • Height - Overhead Guard: 2452mm
  • Min. Turning Radius: 3050mm
  • Min. Ground Clearance - Below Mast: 220mm
  • Min. Ground Clearance - Center of Wheelbase: 315mm
  • Optional Engine:
  • Model: 4JG2
  • Manufacturer: ISUZU
  • Rated Power: 44.9Kw / 2450rpm
  • Max. Torque: 186 N.m /1800rpm
  • Displacement: 3.059L
  • Note:
  • 1. Technical specifications are for standard models only.
  • 2. Other optional accessories, functions and requirements are available upon request.
  • 3. All specifications and design characteristics are subject to change without prior notice.
*
Ø
▼

Similar Machines

(Similar models of the same year with comparable operating hours.)